Honeywell Board Mount Sensor IC

Approx. Rs 1,000 / PieceGet Latest Price

• Calibrated output values for pressure are updated at approximately 1 kHz.The SSC Series is calibrated over the temperature range of -20C to 85C [-4F to 185F].
• The sensor is characterized for operation from a single power supply of either 3.3VDC or 5.0VDC.
• Item Code: SSC-Series

Approx. Rs 7,000 / NumberGet Latest Price

• The HAF Series >10 SLPM is compensated over the calibrated temperature range of 0 °C to 50 °C [32°F to 122°F].
• Thestate-of-the-art ASIC-based compensation provides digital (I2C) outputs with a response time of 1 ms.
• These sensors operate on the heat transfer principle to measure mass airflow.
• They consist of a microbridge Microelectronic and Microelectromechanical System (MEMS) with temperature-sensitive resistors deposited with thin filmsof platinum and silicon nitride.
• The MEMS sensing die is located in a precise and carefully designed airflow channel toprovide repeatable response to flow.Zephyr sensors provide the customer with enhanced reliability, high accuracy, repeatable measurements and the abilityto customize sensor options to meet many specific application needs.
• The combination of rugged housings with a stablesubstrate makes these products extremely robust. They are designed and manufactured according to ISO 9001 standards.
• Item Code: HAF-Series

Approx. Rs 12,300 / NumberGet Latest Price

• Flow/Pressure Range: 0 SLPM to 20.0 SLPM
• Power Consumption: 100mW Max
• Output Voltage at Trim Point: 5.0VDC @ 20 SLPM
• Output Shift over Temperature: ±10% Reading
• Repeatability: ±0.50% Reading
• Supply Voltage: 8.0VDC min., 10.0VDC, 15.0VDC max
• Response Time: 60ms max
• Signal Conditioning: Amplified
• Item Code: AWM5104VC

Approx. Rs 7,000 / NumberGet Latest Price

• Flow/Pressure Range: 0SLPM to 20.0SLPM
• Power Consumption: 100mW Max
• Output Voltage at Trim Point : 5.0VDC @ 20 SLPM
• Output Shift over Temperature: ±7 % Reading
• Repeatability: ±0.50 % Reading
• Supply Voltage: 8.0VDC min., 10.0VDC typ., 15.0VDC max
• Response Time: 60ms max
• Signal Conditioning: Amplified
• Item Code: AWM5104VN

Approx. Rs 15,000 / NumberGet Latest Price

Honeywell AWM700 Series airflow sensor, amplified, flow/pressure range: 200 SLPM; port style: tapered, 22 mm.
The Honeywell AWM700 Series, Compensated/Amplified Airflow Sensors provide in-line flow measurement with a specially designed bypass flow housing. These sensors measure flow as high as 300 standard liters per minute (SLPM) while inducing a typical pressure drop of 1 inH₂O.
The AWM700 has a high flow range capability in a small package, as well as a 6 ms response time. These sensors require a 10 Vdc supply, but consume only 60 mW of power. The compact plastic package withstands overpressures of 1720 mbar | 172 kPa | 25 psi without compromising performance. The snap-in AMP-compatible connector provides reliable connection.
The AWM700 Series provides a combination of time-proven reliability, high accuracy, and precision operating characteristics. This inherent accuracy over life reduces need for recalibration. AWM700 sensor circuitry performs amplification and temperature compensation.
The AWM720P1 and AWM730B5 were developed primarily for the medical ventilation market and meet the high performance requirements of many medical and analytical instrumentation applications.

Additional Information:

Approx. Rs 2,200 / NumberGet Latest Price

The TruStability Standard Accuracy Silicon Ceramic (SSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range.The SSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital.The SSC Series is calibrated over the temperature range of -20 °C to 85 °C [-4 °F to 185 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between two pressure ports.The TruStability® pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O.All products are designed and manufactured according to ISO 9001 standards.

Additional Information:

Approx. Rs 3,500 / NumberGet Latest Price

The MPR Series is a very small piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and compensated over a specific temperature range for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). This product is designed to meet the requirements of higher volume medical (consumer and non-consumer) devices, commercial appliance, and industrial /HVAC applications.

Additional Information:

Approx. Rs 1,200 / NumberGet Latest Price

• Calibrated output values for pressure are updated at approximately 2kHz.
• The HSC Series is calibrated over the temperature range of 0 °C to 50 °C [32°F to 122°F].
• The sensor is characterized for operation from a single power supply of either 3.3VDC or 5.0VDC.
• Item Code: HSC-Series