Send Email
Send SMS
Search
Futuristic Climate Controls
Futuristic Climate Controls


Honeywell PID Controller

Honeywell offers a wide range of PID Controllers to cater to all kind of industrial control needs such as Temperature, Pressure, flow, Level controls.

Controller series DC1040, DC1020, DC1010 is very cost competitive and offers wide variety of options for single loop control.

Controller series UDC offers Single & Dula Loop Controllers and application specific features such as carbon potential controls etc.


Honeywell PID Controller DC1020

REQUEST CALLBACK

Honeywell PID Controller DC1020
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4,000 / NumberGet Latest Price

Product Details:
Minimum Order Quantity1 Number
BrandHoneywell
Digit Display Size4-digit, 7 segment display
Input Resolution14 bit (each)
Current output0~20mA, 4~20mA
Indication Accuracy0.5%FS
Cycle Time0~150 sec

Specifications:
  • PID or ON/OFF control
  • Input Sampling Time: 500ms
  • Input Resolution: 14bit (each)
  • Heat/Cool algorithms with 2 different PID sets.
  • Motor position control without side wire feedback.
  • Single phase control, with or without zero crossover control.
  • Three phase control, with or without zero crossover control.
  • Item Code: DC1020

 

Yes! I am interested

View PDF

Honeywell PID Controller DC1040

REQUEST CALLBACK

Honeywell PID Controller DC1040
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5,000 / NumberGet Latest Price

Product Details:
Minimum Order Quantity1 Number
Model NumberDC1040
BrandHoneywell
Display Size4-digit, 7 segment display
Indication Accuracy0.5%FS
Input Resolution14bit (each)
Input Sampling Time500 ms

We, Futuristic Climate Controls are authorized distributor for Honeywell PID Controller DC1040.

Specifications:
  • Input Resolution: 14bit (each)
  • PV/SP Indication: 4-digit, 7 segment display
  • Constant Value Storage System Non-volatile memory (E 2 PROM)
  • Indication Accuracy: 0.5%FS
  • Input Sampling Time: 500ms
  • Item Code: DC1040
Yes! I am interested

View PDF

Honeywell PID Controller DC1010

REQUEST CALLBACK

Honeywell PID Controller DC1010
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 4,000 / NumberGet Latest Price

Product Details:
Minimum Order Quantity1 Number
Input SensorThermocouple/RTD/mA
BrandHoneywell
TypeDigital
Supply Voltage240VAC
Size48X48 mm
Keys4
Output RelayAlarm Relay

We, Futuristic Climate Controls are authorized distributor for Honeywell PID Controller DC1010.

Specifications:
  • Input: Thermocouple/RTD/mA
  • Power Supply: 240VAC
  • Output Relay: Alarm Relay
  • Size: 48X48mm
  • Keys: 4
  • Item Code: DC1010
Yes! I am interested

View PDF

PID Controller

REQUEST CALLBACK

PID Controller
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandHoneywell
CommunicationRS232 or RS485 ASCII protocol
Supply Voltage100 to 240VAC 50/60Hz
Size1/16 DIN, 1/8 DIN, 3/16 DIN, 1/4 DIN
Ambient temperature-25 to +65 Deg C
Display TypeDual display and Bargraph

Features:
  • PID or ON/OFF control
  • Heat/Cool algorithms with 2 different PID sets
  • Motor position control without slidewire feedback
  • Single phase control, with or without zero crossover control
  • Three phase control, with or without zero crossover control
  • Dual display and Bargraph, 10 LED bar graph for Output
  • Remote Setpoint Optional
  • Communications RS232 or RS485 ASCII protocol is optionally available

Specifications:

  • Rated Power Supply Voltage: 100 to 240VAC 50/60Hz, 8VA max.15 to 50V DC, 10VA max.
  • These are DC1010, DC1020, DC1030, DC1040 family of microprocessor-based controllers that combine a high degree of functionality and reliability.
  • Available in 4 Different Formats: 1/16 DIN, 1/8 DIN, 3/16 DIN, 1/4 DIN
Yes! I am interested

View PDF

Honeywell PID Controllers

REQUEST CALLBACK

Honeywell PID Controllers
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
PhaseSingle phase control, Three phase control
BrandHoneywell
Output10 LED bar graph for Output
CommunicationRS232 or RS485 ASCII protocol
Input Sampling Time500 ms
Current Output0~20mA, 4~20mA, 0~5V, 0~10V, 1~5V, 2~10V

Features:
  • PID or ON/OFF control
  • Heat/Cool algorithms with 2 different PID sets
  • Motor position control without slidewire feedback
  • Single phase control, with or without zero crossover control
  • Three phase control, with or without zero crossover control
  • Dual display and Bargraph, 10 LED bar graph for Output
  • Remote Setpoint Optional
  • Communications RS232 or RS485 ASCII protocol is optionally available

Specifications:
  • Input Sampling Time: 500 ms
  • Current & Voltage outputs : 0~20mA, 4~20mA, 0~5V, 0~10V, 1~5V, 2~10V
  • DC1010, DC1020, DC1030, DC1040 family of microprocessor-based controllers combine a high degree of functionality and reliability at a very low price
  • Available in 4 different formats: 1/16 DIN, 1/8 DIN, 3/16 DIN, 1/4 DIN
  • These controllers are ideal for regulating temperature in a variety of applications
  • Item Code: DC1040-DC1030-DC1020-DC1010
Yes! I am interested

View PDF

Temperature Controllers

REQUEST CALLBACK

Temperature Controllers
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandHoneywell
Power100 to 240V AC
TypeDigital
Ambient Temperature0 to 50 Deg C
MountingPanel-mount
Display4-digit, 7-segment display

Specifications:
  • It has PID or ON/OFF control.
  • Heat/Cool algorithms with 2 different PID sets.
  • Motor position control without slidewire feedback.
  • Single phase control, with or without zero crossover control.
  • Three phase control, with or without zero crossover control.
  • Dual display and Bargraph, 10 LED bar graph for Output
  • Remote Setpoint Optional
  • Communications RS232 or RS485 ASCII protocol is optionally available
  • Item Code: Temperature-Controllers
Yes! I am interested

View PDF

Honeywell Stand Alone AHU Controller UB

REQUEST CALLBACK

Honeywell Stand Alone AHU Controller UB
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandHoneywell
ModelUB-Series
Frequency50/60 Hz
Input3 Digital, 1 Universal input
Output3 Analog, 4 Digital Output
ApplicationAHU Control

We, Futuristic Climate Controls are authorized distributor for Honeywell Stand Alone AHU Controller UB.

Specifications:
  • Input: 3 Digital, 1 Universal input
  • Output: 3 Analog, 4 Digital Output
  • 7 Prebuilt Application Program
  • Brand: Honeywell
  • Application: AHU Control
  • Item Code: UB-Series
Yes! I am interested

View PDF

Flameproof PID Controller

REQUEST CALLBACK

Flameproof PID Controller
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / NumberGet Latest Price

Product Details:
Minimum Order Quantity1 Number
BrandHoneywell
Input TypeUniversal
Current Output4-20 or 0-20mA
Electromechanical Relay5 amp
UsageControl of temperature, pressure, flow, level
Digit DisplayDual

We, Futuristic Climate Controls are authorized distributor for Flameproof PID Controller.

Specifications:
  • Current Outputs: 4-20 or 0-20mA
  • Electromechanical Relays: 5amp
  • Usage: Control of temperature, pressure, flow, level
  • Digit Display: Dual
  • Input: Universal
Yes! I am interested

Honeywell Universal Digital Controller UDC1700

REQUEST CALLBACK

Honeywell Universal Digital Controller UDC1700
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandHoneywell
Model NumberUDC1700
Accuracy(0.1%) Universal Inputs
CommunicationRS485 ASCII
DisplayDigit
Power Supply90 to 264 Vac

Honeywell Universal Digital Controller UDC1700 is obtainable with a succeeding input that accepts either a linear or potentiometer input signal as a remote set point. The UDC1700 controller is accessed by a dual set point option with easy maintenance. These are distributed at a reasonable price in the market after they are tested by our expert groups. The current set point is selected by a digital input which provides the bumpless transfer. These digital controllers contain automatic timing features which are accessed with suitable requirements of clients.

Features:
  • The UDC1700 controller faceplate is rated NEMA 3/IP65 for protection against windblown dust, rain, snow and sleet
  • Remote Setpoint Model The UDC1700 controller is available with a second input that accepts either a linear or potentiometer input signal as a remote setpoint
  • Dual Display The UDC1700 has two four-digit displays with seven LED segments, each configurable for PV and SP (non-adjustable), PV and SP (adjustable), PV and Ramping SP and PV only
  • PC Software Support – The UDC1700 controller is supported with PC software allowing you to quickly configure your device from your PC
  • The UDC1700 controllers accept seven different types of thermocouples, RTDs, current and voltage linear inputs. All inputs are configurable as standard
  • Up to Three Outputs – The UDC1700 controller provides up to three output types (relay, SSR and linear) for time and current proportioning, duplex mode (heat/cool), PV or SP retransmission and alarms
  • In the manual mode, the operator can directly control the output through the two front face keys (upper and lower keys). The output value is monitored on the lower display
Control Algorithms:
  • Four control algorithms can be set up through the configuration menu: On/Off, PID, PD+MR, and TPSC. The TPSC (Three Position Step Control) control algorithm is dedicated to controlling valve positioning without slidewire feedback from the motor shaft
Dual Setpoint:
  • The UDC1700 controller is available with a dual set point option. The current set point is selected by a digital input
Communication:
  • The UDC1700 controller is available with an optional RS-485 communication interface. It provides a link for up to 32 units and a host computer through ASCII or Modbus RTU protocol at up to 19200 baud.

 

Specifications:
  • It includes:
  1. Manual/Automatic Mode: The UDC1700 provides bumpless transfer
  2. High Accuracy (0.1%) Universal Inputs
  3. NEMA 3/IP65 Standard
  • Display: Digit
  • Item Code: UDC1700
Yes! I am interested

View PDF

Honeywell Universal Digital Controller UDC2500

REQUEST CALLBACK

Honeywell Universal Digital Controller UDC2500
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 30,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandHoneywell
ModelUDC2500
Accuracy0.25 %
ProtectionIP66
Current output4-20 or 0-20 ma
CommunicationsRS232 or RS485 ASCII protocol

The Honeywell Universal Digital Controller UDC2500 is Universal Digital Controller which is obtained with various features DIN size while retaining all the reliability, cost effectiveness, simplicity, and popular HMI of Honeywell’s UDC2300. The UDC2500 provides a ¼ DIN sized option for many applications which are accessed at the reasonable price. These UDC2500 includes Universal AC power supply, input/output isolation, RTU.

Specifications:
  • Ethernet 10Base-T TCP/IP communication protocols, optional RS422/485 Modbus®,
  • Isolated Auxiliary Current output which is highly processed                        
  • Modes of Operation: Manual, Automatic with Local Setpoint, Automatic with Remote Setpoint
  • Indicators: Alarm Relay Status (ALM 1 or 2), Control Mode (A or MAN), Temperature Units (F or C), Local Setpoint 1 Active (L), Remote Setpoint or Local Setpoint 2 Active (R), Control Relay Status (OUT 1 or 2)
  • Item Code: UDC2500
Yes! I am interested

View PDF

Honeywell Universal Digital Controller UDC3500

REQUEST CALLBACK

Honeywell Universal Digital Controller UDC3500
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 85,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandHoneywell
Typesingle loop or dual loop
Input4 Digital Inputs
ModelUDC3500
Power Consumption24VA maximum (90 to 264VAC), 18VA maximum (24VAC/DC)
Weight3lbs. (1.3kg)

Honeywell Universal Digital Controller UDC3500 is obtainable with a succeeding input that accepts either a linear or potentiometer input signal as a remote set point. These digital controllers contain automatic timing features which are accessed with suitable requirements of clients. The UDC3500 controller is accessed by a dual set point option with easy maintenance. The current set point is selected by a digital input which provides the bumpless transfer. These are distributed at a reasonable price in the market after they are tested by our expert groups.

 

Features:

  • NEMA 4X – The UDC3500 controller faceplate is rated NEMA 4X/IP66 which allows it to be used in wash-down applications. The front face of the controller will withstand a continuous spray of water at 65 gallons per minute from a 1-inch diameter nozzle for 5 minutes from a distance of 10 to 12 feet

  • Three Universal Inputs – Three universal analog inputs can be configured to operate as 1 universal and 4 high level (4 to 20mA) to provide 5 analog inputs. Each input is isolated, and the controller will accept inputs from a carbon probe for carbon potential control or a feedback slide wire for position proportional control

  • PC Tools – Create configuration with the intuitive software program running on a pocket PC, a Desktop or a laptop computer. Create and edit configurations live or off the line and save in a reference file for future use or to download to other controllers. The software is available in English, Spanish, Italian, German and French

  • Infrared interface – The infrared interface provides a non-intrusive wireless interface connection with the controller and maintains the NEMA 4X/IP66 integrity. No need to get access to the back of the controller to communicate with the instrument, no need to take your screwdriver and wire a communication cable. You can duplicate an instruments configuration, upload or download a new configuration in just a matter of seconds, simply by pointing your pocket PC in the direction of the instrument

  • Ethernet Communications – Industry standard Ethernet communications are available as an option on the UDC3500 controller. This option uses Modbus TCP/IP to connect to other Ethernet networks allowing the user to monitor the process from almost anywhere.


Logic Gates:

  •  Five logic gates configurable as OR, NOR, AND, NAND, XOR, XNOR, or COMPARATOR. Each gate has two inputs and one output. Logic gates may be linked together to perform more complex functions

  • Setpoint Programming – Enables you to program and store up to ten ramp and ten soak segments for set point programming. Run or hold of the program is a keyboard or remote digital switch selectable. Each soak segment may have a unique Guaranteed Soak Deviation value. Each Ramp and Soak Segment can be configured to use any of four PID sets

  • Multi-language prompts – The UDC3500 display can be configured in five different languages, English, Spanish, Italian, German and French


Security Lockout:

  • User selectable 4-digit code is available to maximize process security. Choose from any one of five levels to lock-out just a few functions or the entire keyboard


Specifications:
  • Power Consumption: 24VA maximum (90 to 264VAC), 18VA maximum (24VAC/DC)
  • Weight: 3lbs. (1.3kg)
  • The UDC3500 can be used as a single loop or dual loop controller and can be configured for internal cascade control
  • Item Code: UDC3500
Yes! I am interested

View PDF

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Futuristic Climate Controls
Rajesh Garg (Proprietor)
124, Sunrise Mall, Near Swaminarayan Temple, Judges Bunglow Road Mansi Circle, Vastrapur, Satellite,
Ahmedabad - 380015, Gujarat, India
Call Us: 
Call Response Rate: 81%
Share Us :
F G T L



Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

© Futuristic Climate Controls. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Futuristic Climate Controls